300-Piece Drilling & Driving Set

Always have the right accessory for your next DIY project with the RYOBI 300-Piece Drilling and Driving Set. It’s jam-packed with the essentials you need for drilling holes and driving fasteners into various materials including timber, metal, plastic, brick, concrete and plasterboard. All the necessities are in one convenient case.

This Set includes:
8 x Brad Point Drill Bits
11 x Masonry Drill Bits
42 x Black Oxide Drill Bits
1 x Magnetic Bit Holder
51 x Titanium Coated Drill Bits
3 x Hex Shank Black Oxide Drill Bits
6 x 152mm Spade Bits
4 x 304mm Spade Bits
4 x Carbon Hole Saws
10 x Nut Drivers
3 x Nail Punches
3 x Drill Stoppers
1 x Hex Key
39 x Torx Driver Bits (25mm, 50mm)
20 x Slotted Driver Bits (25mm, 50mm)
38 x Phillips Head (25mm, 50mm)
23 x Hex (25mm)
28 x Square Drive (25mm, 50mm)
1 x Hole Saw Mandrel
1 x Countersink
1 x Centre Punch

The Brad Point Drill Bits have a 3-point design to make clean and precise holes in timber. They range in sizes from 3.97mm-11.11mm.

The Titanium Coated Drill Bits are optimised for drilling into timber, thin metal and plastic. Their titanium coating enhances strength in addition to heat and wear resistance. They range in sizes 0.79mm to 7.94mm.

Use the Black Oxide HSS Drill Bits to drill holes into timber, thin metal and plastic. They vary in sizes from 0.79mm to 11.11mm. Each one is made from a high speed steel for enhanced strength, heat and wear resistance. Their black oxide coating reduces friction and is resistant to rust. A 135° split point prevents these bits from wandering and promotes faster speeds during startup. The Hex Shank Black Oxide Drill Bits deliver the same results and are compatible with impact drivers too. They range in sizes 3.18mm and 3.97mm.

The Masonry Drill Bits are suitable for drilling into brick and concrete. They feature a high volume flute, which ensures optimal dust and debris removal. Sharpened edges and a precision tip to reduce bit wandering and produce clean holes. These Drill bits range in sizes 2.78mm to 11.11mm.

Use the Spade Bits to make large diameter holes in timber. They’re great for door hardware installations, countersinking coach bolts, creating USB cable management systems and various other woodwork projects. A wing spur design adds extra edges to generate a fast cutting action and clean holes. They range in sizes 7.94mm to 31.75mm.

Make large holes in timber, plasterboard and plastic with the Carbon Hole Saws. Use them for door hardware and ceiling downlight installations, setting up USB cable management systems and creating air vent holes for cabinets, closets and cupboards. These Hole Saws range in sizes 31.75mm to 53.98mm and include a Hole Saw Mandrel.

Use the Nut Drivers to tighten and loosen various nuts and bolts. They vary in sizes 3.97mm to 12.70mm.

The 25mm and 50mm Driving Bits feature Torx, Slotted, Phillips Head, Hex and Square Drive patterns so you can loosen or fasten all the most common fastener head types. Magnetic tips provide a secure grip on screws to minimise cam-outs and damage to screw heads.

Use the Nail Punches to drive nails under the surface, concealing them on decorative timber moulding pieces such as skirting boards.

Available in-store and online from Bunnings Warehouse.